nueTVOut allows you to force TV output to be on, and allows use of the TV Out control panel even if you do not have an original HTC Video out cable.
To use the TV Out, you’ll need the audio dongle (rectangular block) that came with the phone, as well as a camcorder/iPod video cable. Plug the camcorder/iPod video cable into the dongle, and plug the dongle into your phone. Open the control panel, enable the video output and select the correct standard (NTSC for United States/Canada), and press ok. If there is no video output, try switching the outputs until you get a signal (for me, the video was on the red right audio RCA, instead of the yellow video RCA). If you don’t get any video, most likely you have a cable for an mp3 player that has the ground connected to the wrong pin. Camcorder/iPod video cables work best.
Note: The exe file in the archive is intended to be run on your phone/device. Copy the exe to your phone/device and run it from there. This tool is meant for devices with video out only and may not work on devices without video out.
Системные требования: WM5 - WM6.5
Дополнительные требования: TV-выход
Тип установки: EXE