WinMobile / Софт для Windows Mobile / Система и утилиты / rk-Location Switch v1.0.6 (WinMobile)

rk-Location Switch v1.0.6


rk-Location Switch is a 'Phone location based application triggerÆ. Launches other applications, command lines and MortScripts and anything based on time frame and location you setup.

rk-LocSwitch can have any numbers of locations and any numbers of actions. But please do understand that this is not a 'readymade profile application' but by configuring it properly you could make it a profile application and much more. Ultimately you can automatically customize your phone based on where you are and the time span you setup.

Update 1.0.2
* Support command line tags, eg Application could automatically send information such as LocationName, LAC, CellID by using the command line tags , , * Application can update registry with the current Location name, LAC and CellID.(HKCUSoftwarerk-LocSwitch). Now your custom application can access the location information!
* New menu added to copy TowerIds from one location to other.
* New menu added to copy actions from one location to other.
* New menu to force saving of the configuration data.

Update 1.0.3
* Support for hide/show 'Un-Defined' location icon.
* Bug fixes

Update 1.0.6
* Support for undefined/unknown location actions added.
* Application now by default starts in minimized mode(not the sys tray mode)

* Run the application rk-LocSwitch from programs for the first time from the programs menu, after which the application starts automatically after soft resets.
* A new task bar icon will appear in the task tray, click it to launch the application(application runs hidden, this is the only way you can access the UI to set it up)
* First tab in the application is ‘General’, the information mostly read-only; you can specify the polling time (in minutes) and enable/disable the application.
* ‘Locations’: lot of information here. First you create a new location from the top part of the screen.
o Location name is just a name such as ‘My Home’, ‘Office’ etc
o Choose a icon ‘which would be displayed on the top notification bar’(you can have custom icons, just add the icons to the ‘Icons’ folder under Programsrk-LocSwitch)
o Check the box ‘Notify’(when ever you are at known location, a icon would show up on the title bar)
o Specify the time frame such as 08:00 to 18:00(day schedule) or 22:00 to 06:00(for night schedule)
o Click OK to save this location
* Add the current tower id displayed to the list, you could have multiple towers (if the location has interference from multiple towers or if you have say multiple ‘Places’ put under same location. Such as you want to configure the location ‘Office’ at two different physical locations but you want to have similar actions to perform.)
* Now go to the ‘Actions’ button
* You have ‘Entry’ and ‘Exit’ actions. You can add multiple actions for each action type. You can even order then ‘up’ or ‘down’. Use the ‘Action’ menu for additional commands such as ‘test the action’.
* Next tab is 'Fixed Actions' here you could setup actions independent of 'Location' meaning these actions takes place irrespective of 'Locations' Useful for setting the backlight of the device.
* Next tab is log where each attempt based on the polling time is logged. You can change the log action to log all, location change (Actions) only or none. Once you understand the concept put it to ‘None’(but if you think that something is not working then switch the log to all and investigate)
* Last tab about: which is basically the registration module and the version info



Setup:

* Install the application.
* Run the application rk-LocSwitch from programs for the first time from the programs menu, after which the application starts automatically after soft resets.
* A new task bar icon will appear in the task tray, click it to launch the application(application runs hidden, this is the only way you can access the UI to set it up)
* First tab in the application is ‘General’, the information mostly read-only; you can specify the polling time (in minutes) and enable/disable the application.
* ‘Locations’: lot of information here. First you create a new location from the top part of the screen.
o Location name is just a name such as ‘My Home’, ‘Office’ etc
o Choose a icon ‘which would be displayed on the top notification bar’(you can have custom icons, just add the icons to the ‘Icons’ folder under Programsrk-LocSwitch)
o Check the box ‘Notify’(when ever you are at known location, a icon would show up on the title bar)
o Specify the time frame such as 08:00 to 18:00(day schedule) or 22:00 to 06:00(for night schedule)
o Click OK to save this location
* Add the current tower id displayed to the list, you could have multiple towers (if the location has interference from multiple towers or if you have say multiple ‘Places’ put under same location. Such as you want to configure the location ‘Office’ at two different physical locations but you want to have similar actions to perform.)
* Now go to the ‘Actions’ button
* You have ‘Entry’ and ‘Exit’ actions. You can add multiple actions for each action type. You can even order then ‘up’ or ‘down’. Use the ‘Action’ menu for additional commands such as ‘test the action’.
* Next tab is 'Fixed Actions' here you could setup actions independent of 'Location' meaning these actions takes place irrespective of 'Locations' Useful for setting the backlight of the device.
* Next tab is log where each attempt based on the polling time is logged. You can change the log action to log all, location change (Actions) only or none. Once you understand the concept put it to ‘None’(but if you think that something is not working then switch the log to all and investigate)
* Last tab about: which is basically the registration module and the version info

Important notes:

* Notes: if you want to configure home day and home night, you must have two locations setup such as ‘Home Day’ and ‘Home Sleep’ have the time frames carefully set e.g. 08:00 to 22:00(Home Day) and or 22:00 to 06:00(for night schedule). Do not overlap the time frames!
* Keep the polling time as large as possible, unless you need real time response.(although I found keeping the polling to minimum (=2 minutes) did not make any noticeable difference to battery usage!. But test it out.
* Do not forget to configure the ‘Entry’ and ‘Exit’ actions properly. Enter and exit actions generally should be cancelling each other (i.e. if you switch on flight mode on entry, make sure you have flight mode off on exit)
* System is real time( ± Polling Time) , so if you are at home with flight mode activated and if you leave the home at mid night phone would switch back on.
* If you really want to exit the program, use the right menu ‘Options’ and choose ‘Save & Exit’
* When you start the application(not while activating the rk-LocSwitch) make sure the phone is not in flight mode
* More importantly this is a ‘Switcher’ so I do not supply any command line applications to do your custom tasks; they are available in this site and over the internet. You are welcome to link in this thread so that it can be easily accessed by other users. But if some customization what you want is not available then you can make a request, and I will do my best to find one or built it myself.

Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.

v1.0.3
Скачать / Download [183.73 Kb]

v1.0.6
Скачать / Download [471.77 Kb]

Системные требования: WM5 - WM6.1
Тип установки: CAB
Как бесплатно качать с файлообменников

Информация

Посетители, находящиеся в группе Гости, не могут оставлять комментарии в данной новости.
  1. вощим гагно
  1. не определяет нифига...как остается в строке с.с так и стоит angry
  1. Прикольно!!! wink
  1. она что, взависимости от местонахождения запускает проги которые ты сам задаеш и меняет профили?
    кто разобрался объясните плиз
  1. Для гнусмаса и710 ниработаит ((( ВМ6.1
  1. чего вечно хипишуют? ну если лень учить английский, пользуйсе гуглевским переводчиком и все будет нормально... ппц!..
  1. И тебе привет DeaDuwka , laughing
    Обычно вашим Опсосом называют "Антена GSM Связи" smile


    П.С. Поставь себе на конец то Аватар , ато я тебя только по нику узнаю thumbup
  1. надо проверить... а то phone alarm вообще моты не определяет у меня
  1. john-1994,
    Здарова дружище)
    ОПСОС=ОПератор СОтовой Связи
    =)
  1. Блин , а что вообще такое
    Цитата: Vetalay_V
    вышки опсоса
    ???


  1. Судя по описанию, прога в зависимости от локации (вышки опсоса) - может выполнять запуск определенных программ, заданых заранее.
  1. блин,а можно хоть краткое описание на нашем родном Русском зделать???:(
  1. Уж не эта ли фигня, которая вышки ОпСоСа записывает и по ним определяет где ты? =))
  1. FATius,
    хз, судя по языку она для американцеф ))
  1. че за софтина???